Proflow Turbocharger Studs, Hex Nuts, M10x1.25 x 70mm, Stainless Steel, Natural, Paint 100:1 turns ratio and lower

100:1 turns ratio and lower primary resistance produce high voltage output

009" per cc 55cc Maximum Note: Angle mills might require

These adapters convert A/C O ring fittings to AN flare

Ideally used on any female -8AN port when needing to adapt a 1/8 npt fitting or sensor

Proflow Turbocharger Studs, Hex Nuts, M10x1.25 x 70mm, Stainless Steel, Natural, Paint 100:1 turns ratio and lowerPart Number : PFETFS70M10 Grab a set of these stainless steel mounting studs, made to securely mount turbochargers and exhaust manifolds. Serrated flanged nuts are also included to reduce the chances of loosening. Note: Anti seize should be applied to all threads to prevent galling.