DA383X - CNC Racing Titanium Flange and Sprocket Nuts for Ducati's, MV Agusta F4/B4 (>09), F3/B3 (2018+), and 2015+ Aprilia RSV4/Tuono V4 - M10x1.25 900SS 2018-2022 Panigale V4 Speciale

2018-2022 Panigale V4 Speciale

and there is room for most important travel accessories in the spacious inner compartment with 6 liters of volume

on the sliding guide (range of 35 mm

This kit will work for any bike with radial calipers where the Axle Pinch Bolts are behind the axle

DA383X - CNC Racing Titanium Flange and Sprocket Nuts for Ducati's, MV Agusta F4/B4 (>09), F3/B3 (2018+), and 2015+ Aprilia RSV4/Tuono V4 - M10x1.25 900SS 2018-2022 Panigale V4 SpecialeCNC Machined Billet Flange Nuts are lighter and stronger (not to mention much better looking!) than your original. On Ducati's and Mv's With a single sided Swing arm (998, Monster 1100, Etc) These Are for attaching the Hub flange (the Pretty part that connects your sprocket to the Axle) to the Cush drives. For M8 nuts to Attach a Quick change Ring gear Sprocket to the Quick change carrier (FC212) use DA385 On the 749 999, Monster 797, and Scrambler