Pay in 4 interest-free payments of $7.49 Learn more
Ships within 48 hours · Estimated delivery Aug 30 - Sep 4
From the waist downwards the silhouette is dominated by a full skirt
As you may remember from my previous post, this was the dresser as she started out: Tools You Will Need: Chisel Mallet Circular saw Measuring tape Pocket hole jig Hammer (or cordless brad nailer) Cordless drill Level 1/16 Drill bit Wood clamps Supplies You Will Need: -1/2 plywood (I used a 1/4 sheet for all 3 drawers that is 2 x 4) 1 pocket hole screws (8 for each drawer) 1 nails 24 scrap to cut wood shims -Ball-bearing metal drawer slides (buy the length as the depth of the drawers 12 long ones are found at WoodCraft and Amazon) -13 boards cut to drawer depth (I used about 6 on this dresser) -1 wood screws (for attaching to drawer face) -1 1/2 wood screws (for attaching 1x3s to side of dresser) Step 1: Remove Old Drawer Slides Using a chisel and mallet remove the old wooden drawer slides from the inside of the dresser
For spring
This keeps the neckline design visible while providing warmth
US$ 26.38
US$ 27.07
US$ 23.79
US$ 29.33
